WM3005-355

Mold type: Compression mold

Material: BMC

Part size: 276.9*127*104.8 MM

Part name: Runback Support

Cavity number: 2

Mold steel: H13

2-Cavity BMC Compression Mold for Runback Support

This 2-cavity BMC compression mold for Runback Support is manufactured with H13 steel for a 276.9 × 127 × 104.8 mm thermoset component.

For this project, the important consideration is not simply producing two parts per molding cycle. Both cavities need to support consistent component dimensions and reliable molding performance.

SET MOLD can review cavity arrangement, material distribution, heating, venting, demolding and the functional features that need to remain consistent between the two cavities.

Cavity-to-Cavity Consistency

A two-cavity mold should be validated using samples from both cavities.

Depending on the component drawing, the T1 inspection plan can focus on:

• Mounting positions
• Datum surfaces
• Mating dimensions
• Overall geometry
• Critical positional tolerances
• Differences between cavity 1 and cavity 2

SET MOLD has in-house CMM, profile projector and height-gauge inspection capability for dimensional verification during mold manufacturing and approval.

Cavity Quantity Can Be Designed Around Your Output

The two-cavity configuration shown on this page is specific to this project. SET MOLD develops customized compression molds rather than offering only fixed tooling configurations.

The appropriate cavity number can be evaluated from:

part size + required annual volume + molding cycle + compression press capability + BMC material

SET MOLD supports in-house mold design and manufacturing as well as prototype and trial mold development for thermoset projects.

Send your part drawing, annual demand, BMC grade and press information for cavity-layout evaluation.