Mold type: Compression mold

Material: BMC

Part size: 356x280x86mm

Part name: 4-Pole Front Cover

Cavity number: 1

Mold steel: H13

BMC Compression Mold for 4-Pole Front Cover

BMC 4-Pole Front Cover Mold is a single-cavity compression tool manufactured with H13 steel for a 356 × 280.5 × 86.55 mm electrical component.

For an electrical front cover, successful tooling means more than producing the overall shape. Hole positions, mounting surfaces, mating features and areas around the parting line must remain suitable for downstream assembly.

Mold Development Around Your Acceptance Requirements

Before manufacturing a similar BMC compression mold, SET MOLD can review:

• Critical mounting-hole positions
• Mating and datum surfaces
• Areas sensitive to flash
• BMC shrinkage
• Surface requirements
• Dimensional tolerances
• Compression machine conditions

SET MOLD uses mold-flow and thermal analysis during the design phase and dimensional inspection during machining and final verification. Trial parts are checked for dimensions, surface condition and functional requirements before delivery.

This means the T1 standard can be defined before mold manufacture, rather than deciding whether the mold is acceptable only after the first samples arrive.

CMM Inspection for Critical Features

SET MOLD uses CMM and dedicated inspection equipment to verify dimensional and positional accuracy of critical mold components.

For a front-cover project, mark the dimensions that directly affect assembly on the 2D drawing. These can then become priority inspection points during mold validation.

Send your part drawing, BMC grade, press information and T1 acceptance requirements for tooling evaluation.

Discuss Your BMC Front Cover Mold